Connect with us


How to Clean Humidifier Correctly & Why Should We Do It



Сlean Humidifier Correctly

Are the air in your home feeling a bit stuffy? Take the time to clean your humidifier–it’s one of the best ways to ensure healthy, properly humidified airflow in any space.

Geniani experts (official page) suggest completely emptying out the water tank and pouring out any base residue before taking apart; all filters, wicks or other components should be kept separately for cleaning purposes. Once each piece has been disassembled and ready for cleaning – you’re good!

Now let’s take a closer look at how to properly clean a humidifier and what it serves for.

How to Clean Humidifier With Vinegar

Сlean Humidifier Correctly

Making cleaning your humidifier effortless has never been simpler with this straightforward solution. All you need is a bowl, white vinegar and warm water – mixed in equal parts to create an ideal cleaning blend. Dip each piece of equipment into this solution for 10-15 minutes before gently scrubbing away any grime or residue with a soft cloth or sponge. Finally, rinse all components until they look like new!

Keep your humidifier hygienic with effective disinfectants such as Ortho Home Defense Max Indoor Insect Killer or Lysol All-Purpose Cleaner Spray.


These products contain powerful phenols and pine oils that are specially formulated to eliminate germs and bacteria lurking inside its components. For optimal protection against unwanted visitors, follow product instructions carefully before reassembling for use again.

How to Clean Humidifier Without Vinegar

Maintaining a clean and safe humidifier is as easy as following three simple steps: empty out the tank, wash it with warm soapy water and allow to air dry completely before refilling. For deeper cleaning, replace filters when needed and use mild bleach solution on any visible surfaces inside the reservoir every two weeks or more often if necessary. Doing this will guarantee your device runs optimally while giving you peace of mind knowing your space stays healthy!

Maintain your vaporizer/evaporative’s optimal performance by remembering to clean its filter every 1-2 months. Remove the wicking filter and soak in a dishwashing detergent solution for 15 minutes; rinse with fresh tap water until all soap residue has been eliminated, then dry thoroughly before placing back into your unit.

Maintain the health of your humidifier and everyone living within its environment by regularly cleaning it. Empty out any remaining liquid from both types of humidifiers then wipe down all surfaces with warm, soapy water using a damp cloth or sponge – this will help ensure germ-free air quality indoors!

How to Clean a Humidifier with Mold

Maintaining your humidifier’s optimal condition is no small feat. To begin, disconnect it from its power source and empty any leftover water if using an evaporative model. Then fill up the tank with warm water mixed with 1 teaspoon bleach or white vinegar per gallon and allow to sit for at least 60 minutes before draining completely for successful results!


Maintain your humidifier’s optimal performance by gently brushing away mineral deposits and build-up with a brush or old toothbrush. Be sure to pay special attention to hard-to-reach places like corners or crevices when doing this task. Once all dirt has been eliminated, rinse any remaining residue away using warm water before drying each component completely with a towel or cloth before reassembling the device.

Maintaining your humidifier’s cleanliness and mold free is essential for optimal performance. Make sure to empty its water tank on a weekly or biweekly basis depending on usage, while avoiding sources of heat such as radiators or direct sunlight that could cause moisture build-up inside the unit – an ideal breeding ground for mold growth. Investing in preventive maintenance now will reap rewards in terms of long-term efficiency in order to enjoy a neat and healthy home!

Before your humidifier can function optimally, it’s essential to perform a thorough sanitation. Let the components dry naturally before assembly; placing an old towel or rag underneath can help absorb any extra water droplets that might fall during setup. Finally, fill up the tank with fresh tap water and start enjoying clean, humidity-controlled air in no time!

Read Also: